HP Onboard Administrator - Manual (Page 68)

Enclosure Bay IP Addressing commands 68
Successfully set device (iLO) bay #5B to IPv6 address 4001::4bd0/64
Successfully set device (iLO) bay #6B to IPv6 address 4001::4bd1/64
Successfully set device (iLO) bay #7B to IPv6 address 4001::4bd2/64
Successfully set device (iLO) bay #8B to IPv6 address 4001::4bd3/64
For the IPv6 addresses to be assigned EBIPAv6 must be enabled.
SHOW EBIPA
• Command:
SHOW EBIPA
• Description:
Displays EBIPA information
• Access level/Bay level:
Administrator, Operator, user
• Restrictions:
None
• Example:
OA-0018FE27577F> SHOW EBIPA
EBIPA Device Server Settings
Bay Enabled EBIPA/Current Netmask Gateway DNS
Domain
--- ------- --------------- --------------- --------------- ---------------
------
1 Yes 172.16.211.111 255.255.0.0 172.16.0.1 172.16.0.1
test.com
172.16.211.111 172.16.0.2
172.16.0.3
1A Yes 172.16.211.119 255.255.0.0 172.16.0.1 172.16.0.1
test.com
172.16.0.2
172.16.0.3
1B Yes 172.16.211.127 255.255.0.0 172.16.0.1 172.16.0.1
test.com
172.16.0.2
172.16.0.3
2 Yes 172.16.211.112 255.255.0.0 172.16.0.1 172.16.0.1
test.com
172.16.211.112 172.16.0.2
172.16.0.3
2A Yes 172.16.211.120 255.255.0.0 172.16.0.1 172.16.0.1
test.com
172.16.0.2
172.16.0.3
2B Yes 172.16.211.128 255.255.0.0 172.16.0.1 172.16.0.1
test.com
172.16.0.2
172.16.0.3
3 Yes 172.16.211.113 255.255.0.0 172.16.0.1 172.16.0.1
test.com