Show health – HP Onboard Administrator User Manual
Page 103
Enclosure network configuration commands 103
o
In ON mode, Onboard Administrator is in a FIPS 140-2-compliant mode, using only FIPS 140-2
approved algorithms such as AES and TLSv1.2.
o
In DEBUG mode, Onboard Administrator is in a similar state as ON but with option for HP debug
support.
•
Example:
OA-E4115BECFBAB> show fips mode
FIPS Mode is Off
SHOW HEALTH
•
Command:
SHOW HEALTH
•
Description:
Displays current health of all components in the enclosure. If a component is degraded or failed, a
cause and corrective action are provided.
•
Access level/Bay level:
All
•
Restrictions:
None
•
Example:
Enclosure Health:
Enclosure: OK
Power Subsystem: OK
Cooling Subsystem: OK
Blade Health:
Bay Status Problem Corrective Action
--- -------------------- ----------------------
--------------------------------
1 OK
2 Absent
3a Error Management Processor An iLO failure has been
detected. Make sure you
have a
suitable iLO firmware
loaded.
Reseating the blade or
resetting
iLO may also help.
Other iLO Network The network connectivity
of iLO
is impaired. This could be
due
to bad gateway, DNS or
netmask