HP Onboard Administrator - Manual (Page 185)

USB support commands 185
USB support commands
DOWNLOAD CONFIG using USB key
• Command:
DOWNLOAD CONFIG <url>
• Description:
Downloads a saved configuration file from a specific IP host. The file is not checked for errors but is
automatically executed in SCRIPT MODE. Supported protocols are HTTP, FTP, TFTP, and USB. Format
the <url> as protocol://host/path/file. If your FTP server does not support anonymous connections,
then you can specify a username and password by replacing the host part in the previous format with
username:password@host. To execute a configuration script from a USB key, use usb://<directory
name>/<script file name>.
• Access level/Bay level:
OA administrator
• Restrictions:
o The file cannot change the Administrator account password.
o The user password is not saved or restored by the DOWNLOAD CONFIG command.
SET SERVER DVD for USB key
• Command:
SET SERVER DVD {CONNECT | DISCONNECT} [USB://url] {ALL | <bay number> [{ ,
| - } <bay number>]}
• Description:
Connects or disconnects the specified server or range of servers from the enclosure DVD drive. The
DISCONNECT argument detaches any URL in addition to the enclosure DVD. USB://url is an optional
parameter that matches the URL to an .iso file displayed by the SHOW USB command.
• Access level/Bay level:
Administrator, operator
Bay specific
• Restrictions:
You must have access to the specified bay number.
SHOW USBKEY
• Command:
SHOW USBKEY