Set snmp contact, Set snmp location, Show fips mode – HP Onboard Administrator User Manual
Page 102
Enclosure network configuration commands 102
•
Example:
OA> set snmp engineid testid
SNMP engine id set to "0x8000000b04746573746964"
SET SNMP CONTACT
•
Command:
SET SNMP CONTACT "<contact>"
•
Description:
Configures the name of the system contact. The default contact is blank.
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
o
The <contact> must be no more than 20 characters long.
o
Any printable character is acceptable. If <contact> includes spaces or hash signs, include it
within double quotes.
SET SNMP LOCATION
•
Command:
SET SNMP LOCATION "<location>"
•
Description:
Configures the SNMP location of the enclosure. The default location is blank.
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
o
The <location> must be no more than 20 characters long.
o
Any printable character is acceptable. If <location> includes spaces or hash signs, include it
within double quotes.
SHOW FIPS MODE
•
Command:
SHOW FIPS MODE
•
Description:
Displays the FIPS Mode setting.
•
Access level/Bay level:
OA administrator, OA user
•
Restrictions: