Update image using usb key – HP Onboard Administrator User Manual
Page 186
USB support commands 186
•
Description:
Displays a list of Firmware images, configuration scripts, and ISO images present on the enclosure USB
media
•
Access level/Bay level:
OA administrator, OA operator
•
Restriction:
None
•
Example:
OA-00215AB195CB> show usbkey
Firmware Image Files Image Version
--------------------------------------- -------------
usb://d1/hpoa225.bin 2.25
Configuration Script Files
---------------------------------------
usb://d1/USE62317RY.cfg
ISO Image Files
---------------------------------------
usb://d1/win2003sp4.iso
usb://d1/BB130.2008_0822.11.iso
usb://d1/HPSUMForce.iso
usb://d1/FW820.2008_0730.61.iso
UPDATE IMAGE using USB key
•
Command:
UPDATE IMAGE {{[FORCE] {<url> | FW_ISO}} | SYNC}
•
Description:
o
The UPDATE IMAGE command downloads a new flash image from the network and uses it to
update the Onboard Administrator firmware. If a redundant Onboard Administrator is present in
the system, then this command flashes and validates its firmware before attempting to flash the
active Onboard Administrator.
o
Supported protocols are HTTP, FTP, and TFTP.
o
The URL must be formatted as: protocol://host/path/filename.
o
The URL syntax for IPv6 addresses is protocol://[<ipv6 address>]/path/file.
o
If your FTP server does not support anonymous logins, a user name and password can be specified
within the URL formatted as: ftp://username:password@host/path/filename.
o
Use FORCE to enable downgrading firmware even if settings and passwords might be lost.
o
The UPDATE IMAGE SYNC command initiates a firmware sync of the Active and Standby Onboard
Administrators.
o
For USB protocol, see the SHOW USBKEY (on page
) command.
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions: