Enclosure bay ip addressing commands, Add ebipa, Add ebipav6 – HP Onboard Administrator User Manual
Page 60: Disable ebipav6
Enclosure Bay IP Addressing commands 60
Enclosure Bay IP Addressing commands
ADD EBIPA
•
Command:
ADD EBIPA {SERVER | INTERCONNECT} DNS <ip address> [{ , | - } <bay number>]
•
Description:
Adds a DNS server IP address to the list of DNS servers for either SERVER bays or INTERCONNECT
bays
•
Access Level/Bay level:
Administrator, Operator
•
Restrictions:
o
A maximum of three DNS servers can be added for EBIPA.
o
The <ip address> must be in the form ###.###.###.###, where each ### ranges from 0 to 255.
ADD EBIPAV6
•
Command:
ADD EBIPAV6 { SERVER | INTERCONNECT } DNS <ipv6 address> [ ALL | <bay number>
[{ , | - } <bay number>] ]
•
Description:
Adds an EBIPA DNS server IPv6 address to the list of DNS servers for either server bays or interconnect
bays.
•
Access Level/Bay level:
OA administrator, OA operator
•
Restrictions:
o
A maximum of three IPv6 DNS servers can be added for EBIPA.
o
A bay number or bay range may be specified. If no bay number or bay range is specified, the IPv6
DNS server is added to all servers or interconnects.
o
The <ip address> must be in the form ####:####:####:####:####:####:####:####/###,
where #### ranges from 0 to FFFF. A compressed version of the same IPv6 address is also
supported.
DISABLE EBIPAV6
•
Command:
DISABLE EBIPAV6 { SERVER | INTERCONNECT } [ ALL | <bay number> [{ , | - }
<bay number>] ]