Remove hpsim certificate, Set hpsim trust mode, Show hpsim info – HP Onboard Administrator User Manual
Page 48
HP SIM commands 48
OA administrator
•
Restrictions:
o
Do not include the network prefix length with IPv6 addresses.
o
When the Onboard Administrator is operating in FIPS Mode, the minimum RSA key length is 2048
bits, and the signature hash algorithm must be SHA1, SHA-224, SHA-256, SHA-384, or SHA-512.
o
Onboard Administrator 4.11 and later contains HP SSO application support for determining the
minimum SSO certificate requirements.
REMOVE HPSIM CERTIFICATE
•
Command:
REMOVE HPSIM CERTIFICATE "<certificate name>"
•
Description:
Removes the trust certificate corresponding to the <certificate name>. Disables HP SIM SSO through the
application (for example HP SIM) that provided the certificate without disabling other HP SIM
applications.
The <certificate name> can be obtained using the SHOW HPSIM INFO command.
•
Access level/Bay level:
OA administrator
•
Restrictions:
None
SET HPSIM TRUST MODE
•
Command:
SET HPSIM TRUST MODE {CERTIFICATE [ON] | DISABLED [OFF]}
•
Description:
Enables or disables the HP SIM SSO mode. When enabled, the trusted applications can access the
Onboard Administrator GUI data without requiring additional authentication.
•
Access level/Bay level:
OA administrator
•
Restrictions:
The CERTIFICATE (On) mode trusts only applications with certificates that have been uploaded to the
Onboard Administrator.
SHOW HPSIM INFO
•
Command:
SHOW HPSIM INFO
•
Description:
Displays the current HP SIM SSO configuration for the Onboard Administrator.