HP Onboard Administrator - Manual (Page 95)

Enclosure network configuration commands 95
Removes an IPv4 or IPv6 address from the list of addresses being handled by the IP Security feature.
• Access level/Bay level:
OA administrator, OA operator
• Restrictions:
None
SET ALERTMAIL MAILBOX
• Command:
SET ALERTMAIL MAILBOX "<email address>"
• Description:
Sets the email address where events are sent
• Access level/Bay level:
OA administrator, OA operator
• Restrictions:
None
SET ALERTMAIL SENDERDOMAIN
• Command:
SET ALERTMAIL SENDERDOMAIN "<domain>"
• Description:
Sets the AlertMail domain. This command is the DNS domain where the Onboard Administrator is
located (for example, http://www.AB.com).
• Access level/Bay level:
OA administrator, OA operator
• Restrictions:
The OA accepts domain name character strings subject to the following constraints:
— The string must be between 1 and 255 characters in length.
— The characters are case insensitive.
— The first character of the domain name must be alphanumeric, while the last character can be
either alphanumeric or a period.
— The characters between the first and last character can be alphanumeric, dash or period.
— If one or more periods appear in the name, they are used to delimit labels.
— Labels are between 1 and 63 characters long and begin and end with an alphanumeric
character.
— The last label is referred as the top-level domain and cannot consist of all numeric characters.