HP Onboard Administrator - Manual (Page 168)

Interconnect management commands 168
Interconnect management commands
ASSIGN INTERCONNECT
• Command:
ASSIGN INTERCONNECT {ALL | <bay number> [{ , | - } <bay number>]} {"<user
name | LDAP GROUP <LDAP group name>"}
• Description:
Assigns interconnects specified to an existing user or group
• Access level/Bay level:
OA administrator
• Restrictions:
None
CLEAR INTERCONNECT SESSION
• Command:
CLEAR INTERCONNECT SESSION <bay number>
• Description:
Terminates a serial console session of a user on an interconnect. The termination is not graceful and the
user loses any unsaved work.
• Access level/Bay level:
Administrator, operator
Bay specific
• Restrictions:
You must have explicit access to a bay given by the ASSIGN INTERCONNECT command.
CONNECT INTERCONNECT
• Command:
CONNECT INTERCONNECT <bay number>
• Description:
Connects the user to the serial console of the interconnect present in the interconnect module bay
• Access level/Bay level:
All
Bay specific
• Restrictions: