Hp sim commands, Add hpsim certificate, Download hpsim certificate – HP Onboard Administrator User Manual
Page 47
HP SIM commands 47
HP SIM commands
ADD HPSIM CERTIFICATE
•
Command:
ADD HPSIM CERTIFICATE <end marker> <\n> <certificate> <\n> <end marker>
•
Description:
Adds an HP SIM certificate on the command line. To add the certificate:
a.
Start with a string that does not appear within the certificate (the end marker).
b.
Insert a newline character by pressing Enter.
c.
Paste in the certificate.
d.
Insert a newline character by pressing Enter.
e.
Insert the end marker.
f.
Issue the command by pressing Enter.
Failure to give a proper end marker before and after the certificate might cause the interface to wait for
the appropriate end marker indefinitely.
•
Access level/Bay level:
OA administrator
•
Restrictions:
o
This command is only available in script mode.
o
The certificate text cannot exceed 3071 characters.
o
When the Onboard Administrator is operating in FIPS Mode, the minimum RSA key length is 2048
bits, and the signature hash algorithm must be SHA1, SHA-224, SHA-256, SHA-384, or SHA-512.
DOWNLOAD HPSIM CERTIFICATE
•
Command:
DOWNLOAD HPSIM CERTIFICATE { <host> }
•
Description:
o
Downloads an HP SIM certificate from the specified IP address or fully-qualified DNS system name
(for example, nwest-office.acme.com).
o
The <host> value can be an IPv4 address, an IPv6 address, or a DNS name.
o
For IPv4, specify the address in the form ###.###.###.###, where each ### ranges from 0 to
255.
o
For IPv6, specify the address in the form ####:####:####:####:####:####:####:####, where
each #### ranges from 0 to FFFF.
•
Access level/Bay level: