General management commands, Disable urb, Download oa certificate – HP Onboard Administrator User Manual
Page 50
General management commands 50
General management commands
DISABLE URB
•
Command:
DISABLE URB
•
Description:
Disables URB reporting.
•
Access level/Bay level:
OA Administrator, OA Operator
•
Restrictions:
None
•
Example:
OA-0018FE27577F> disable urb
Utility Ready Blade (URB) reporting has been disabled.
DOWNLOAD OA CERTIFICATE
•
Command:
DOWNLOAD OA CERTIFICATE [<bay number> | ACTIVE | STANDBY] <url>
•
Description:
o
Downloads a CA supplied pkcs#7 file to replace the current security certificate on the system.
o
If the bay number is not specified, the certificate is generated for the current Onboard Administrator.
o
Specify a URL where this certificate can be found.
o
Supported protocols are HTTP, FTP, and TFTP.
o
Format the URL as protocol://host/path/file.
o
The URL syntax for IPv4 addresses is protocol://<ipv4 address>/path/file.
o
The URL syntax for IPv6 addresses is protocol://[<ipv6 address>]/path/file.
o
If your FTP server does not support anonymous connections, you can specify a user name and
password in the format ftp://username:password@host/path/file.
•
Access level/Bay level:
OA administrator
•
Restrictions:
When the Onboard Administrator is operating in FIPS Mode, the minimum RSA key length is 2048 bits,
and the signature hash algorithm must be SHA1, SHA-224, SHA-256, SHA-384, or SHA-512.