Show rack name, Show topology – HP Onboard Administrator User Manual
Page 23
Rack commands 23
SHOW RACK NAME
•
Command:
SHOW RACK NAME
•
Description:
Displays the user defined rack name setting for the enclosure
•
Access level/Bay level:
All
•
Restrictions:
None
•
Example:
OA-0018FE27577F> SHOW RACK NAME
Rack Name: UnnamedRack
SHOW TOPOLOGY
•
Command:
SHOW TOPOLOGY [IPV6]
•
Description:
o
Displays information about the enclosures connected by the enclosure link
o
Displays a table with the enclosure name, UUID, Enclosure Rack U Position, overall health of the
enclosure, and the IP address
o
Displays IPv4 information by default. To display IPv6 information, enter the IPV6 keyword
•
Access level/Bay level
All
•
Restrictions:
To display IPv6 address and address type only, use the IPv6 keyword.
•
Example:
OA-0018FE2F6941> show topology
Detecting linked enclosures ..
Rack Topology (top-down)
Rack UUID: 09USE818AMMP
Rack Name: r12
Enclosure Name Status Local IP Address UUID
Rack U Position
-------------------------------- -------- ----- ---------------
-------------- ----------
USE818AMMP OK Yes 172.16.1.58 09USE818AMMP 6
USE812AMMP OK No 172.16.1.59 09USE812AMMP
--hardware not found--