Show server status – HP Onboard Administrator User Manual
Page 163
Blade management commands 163
8 AiO SB600c Storage Disabled 0
8A Absent Disabled 0
8B Absent Disabled 0
SHOW SERVER STATUS
•
Command:
SHOW SERVER STATUS {ALL | <bay number> [{ , | - } <bay number>]}
•
Description:
Displays the following settings of server blade:
o
Power (OK or off)
o
Health (OK, CPU failure, or power module failure)
o
Thermal (OK, warm, caution, or critical)
o
UID LED
If the power management controller is outdated or is in a lockup condition, a power management
controller error appears.
•
Access level/Bay level:
All
Bay specific
•
Restrictions:
o
You must have access to the specified bay number.
o
Different sides of the server bay cannot be designated within the same range.
•
Example:
OA-0018FE27577F> show server status all
Blade #1 Status:
Power: On
Current Wattage used: 212
Health: OK
Unit Identification LED: Off
Diagnostic Status:
Internal Data OK
Management Processor OK
I/O Configuration OK
Power OK
Cooling OK
Location OK
Device Failure OK
Device Degraded OK
iLO Network OK
Blade #2 Status:
Power: On
Current Wattage used: 360
Internal Health: OK
System Health: Degraded
Unit Identification LED: Off
Diagnostic Status:
Internal Data OK
Management Processor OK
I/O Configuration OK