HP Onboard Administrator - Manual (Page 148)

Enclosure Firmware Management commands 148
12, ProLiant BL495c G6, Mon 2010-09-13 17:18:28, System ROM, A14 2009.12.09,
A14 2009.12.09, ILO2, 1.81, 1.82, Power Management Controller, ERROR, , HP
NC532i Dual Port 10GbE Multifunction BL-c Adapter , Boot code: 5.2.7, Boot
code: 5.2.7, HP NC532i Dual Port 10GbE Multifunction BL-c Adapter , iSCSI:
3.1.5, iSCSI: 3.1.5,
13, ProLiant BL460c G1, Mon 2010-09-13 17:19:08, System ROM, I15 2009.07.10,
I15 2009.07.10, ILO2, 1.70, 1.82, Power Management Controller, , , HP NC373i
Multifunction Gigabit Server Adapter , Boot code: 4.4.1, Boot code: 4.4.1,
HP NC373i Multifunction Gigabit Server Adapter , CLP: 1.3.6, CLP: 1.3.6, HP
NC373i Multifunction Gigabit Server Adapter , Boot code: 4.4.1, Boot code:
4.4.1, HP NC373i Multifunction Gigabit Server Adapter , CLP: 1.3.6, CLP:
1.3.6, Smart Array E200i, 1.86, 1.86, - DG036A8B53 (Bay 0), HPD7, , -
DG036A9BB6 (Bay 1), HPD0, , P700m SAS Controller, 7.18, 1.86, - DG036A8B53
(Bay 0), HPD7, , - DG036A9BB6 (Bay 1), HPD0, ,
14A, ProLiant BL2x220c G5, Mon 2010-09-13 17:27:14, System ROM, I19
2009.07.10, I19 2009.07.10, ILO2, 1.82, 1.82, Power Management Controller,
ERROR, , HP NC326i PCIe Dual Port Gigabit Server Adapter , Boot code: 3.28,
Boot code: 3.28,
14B, ProLiant BL2x220c G5, No, System ROM, I19 07/10/2009, , iLO2, 1.79 Aug
28 2009, , Power Management Controller, 3.4, ,
SHOW FIRMWARE LOG SERVER
• Command:
SHOW FIRMWARE LOG SERVER { ALL | <bay number> [{ , | - } <bay number>] }
• Description:
Displays the firmware log for the selected server or range of servers
• Access level/Bay level:
o All
o Bay specific
• Restrictions:
You must have access to the specified bay number.
• Example:
OA-00215AB0EA21> show firmware log server 5
Bay 5 firmware log
Sep 13 17:09:01 Started session with iLO2.
Sep 13 17:09:01 Powering off blade with button press.
Sep 13 17:09:11 Blade successfully powered off.
Sep 13 17:09:11 Powering on blade with button press.
Sep 13 17:09:21 Blade has powered on.
Sep 13 17:09:24 Connected to Virtual Serial Port.
Sep 13 17:09:26 Inserted http://mycompany.com/DVD.iso into virtual CD-ROM.
Sep 13 17:09:26 Booting virtual CD-ROM.
Sep 13 17:10:03 Loading firmware image.
Sep 13 17:19:43 Update blade firmware successfully completed.
Sep 13 17:19:43 Blade has been rebooted.
Sep 13 17:19:45 Removed http:// mycompany.com/DVD.iso from virtual CD-ROM.
Sep 13 17:19:45 Disconnect from Virtual Serial Port.
Sep 13 17:19:46 Terminated iLO2 session.
Sep 13 17:19:48 Firmware Management successfully completed.