Show oa uptime, Show oa usb – HP Onboard Administrator User Manual
Page 133
Enclosure management commands 133
Name: OA-0018FE27577F
Role: Active
UID: Off
Status: OK
Diagnostic Status:
Internal Data
OK
Firmware Mismatch
OK
OA Battery
OK
SHOW OA UPTIME
•
Command:
SHOW OA UPTIME [ALL | <bay number> [{ , | - } <bay number>] | ACTIVE | STANDBY]]
•
Description:
Displays uptime for the Onboard Administrator. If you do not specify the Onboard Administrator, the
command defaults to the Active Onboard Administrator.
•
Access level/Bay level:
All
•
Restrictions:
None
•
Example:
OA-0018FE27577F> SHOW OA UPTIME
active all standby
OA-0018FE27577F> SHOW OA UPTIME ACTIVE
Onboard Administrator #1:
Role: Active
Uptime: 0 days, 0 hours, 43 min
CPU Load: 0.00, 0.02, 0.06
SHOW OA USB
•
Command:
SHOW OA USB
•
Description:
o
Displays which USB controller is currently enabled.
o
The FRONT controller enables the internal DVD drive and the front USB connector.
o
The BACK controller enables the two USB ports on the near KVM Option Module.
o
This command has no effect on HP c3000 Onboard Administrator boards that are hardware
revision level C0 and later. Hardware revision is found using the SHOW OA INFO command.
•
Access level/Bay level:
All
•
Restrictions:
None
•
Example:
OA-0018FE27577F> SHOW OA USB