Set display events, Set enclosure asset – HP Onboard Administrator User Manual
Page 115
Enclosure management commands 115
o
hh: Hour (24-hour time)
o
mm: Minute
o
CC: Century
o
YY: Year
o
TZ: Time zone
If you leave the time zone variable blank, then the current time zone is left in effect.
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions:
Date and time can only be set if NTP is disabled.
MM is an integer from 01 to 12.
DD is an integer from 01 to 31.
hh is an integer from 00 to 24.
mm is an integer from 00 to 60.
For valid time zones, see "Time Zone settings (on page
)".
SET DISPLAY EVENTS
•
Command:
SET DISPLAY EVENTS {ON | OFF}
•
Description:
o
Turns the displaying of events that are triggered by status changes in the system on or off.
o
This command is specific to the CLI session, and must be issued for every CLI session to display
events in that session.
•
Access level/Bay level:
All
•
Restrictions:
Only for bays for which you have privileges
SET ENCLOSURE ASSET
•
Command:
SET ENCLOSURE ASSET [TAG] "<asset tag>"
•
Description:
o
Sets the enclosure asset tag
o
The default enclosure asset tag is blank
•
Access level/Bay level:
OA administrator, OA operator
•
Restrictions: