JLG 1100SB Service Manual User Manual
Page 227
Advertising
SECTION 4 - BOOM & PLATFORM
3121265
– JLG Lift –
4-57
16.
To remove the main pressure seals (205), it is easi-
est to cut them using a sharp razor blade being
careful not to damage the seal groove.
17.
Remove the thrust washers (304), from the end cap
(4) and shaft (2).
18.
Remove the wiper seal (304.1) from its groove
in the
end cap (4) and shaft (2).
19.
Remove the piston O.D. seal (202).
20.
Remove the piston I.D. seal (200). You may now
proceed to the inspection process.
Advertising