JLG 1100SB Service Manual User Manual
Page 333
Advertising
SECTION 6 - JLG CONTROL SYSTEM
3121265
– JLG Lift –
6-49
13.
Hit Enter. The number displayed will be the value
that the crack point is set to. The screen will show:
14.
Hit Enter. The screen will read:
15.
Repeat steps 10 thru 12 for left reverse drive.
16.
Left Reverse Drive Calibration will be followed by
Right Forward Drive Calibration which will be fol-
lowed by Right Reverse Calibration.
17.
After completing all the Drive Calibrations, hit ESC
twice to go back to CALIBRATIONS.
Advertising