Boom sensor calibration position 2 -70 – JLG 1100SB Service Manual User Manual
Page 354
Advertising
SECTION 6 - JLG CONTROL SYSTEM
6-70
– JLG Lift –
3121265
23.
After making sure the machine is in Calibration Posi-
tion 1, hit Enter. The screen will read:
24.
Lift up to stop (full stroke of cylinder) for Calibration
Position 2. When the machine is in that position, hit
Enter.
The screen will read:
Figure 6-15. Boom Sensor Calibration Position 2
Advertising