JLG 1100SB Service Manual - Manual (Page 62)

SECTION 3 - CHASSIS & TURNTABLE
3-20 – JLG Lift – 3121265
THE MAX WHEEL SPEED WITH DISENGAGED GEARBOX MUST
NOT EXCEED 25 REV/MIN.
1. Unscrew the 2 socket head screws M8x16 (4), grade
8.8, of the end cover (7) with a male hex head
wrench.
2. Rotate the cap nut (5).
3. Take out the cap nut (5).
4. Turn the cap nut (5) upside down. As result the pin
(3) will be pushed inside in order to permit disen-
gagement of the gearbox.
5. Rotate the cap nut (5).
Figure 3-15. Gearbox engaged