JLG 1100SB Service Manual User Manual
Page 346
Advertising
SECTION 6 - JLG CONTROL SYSTEM
6-62
– JLG Lift –
3121265
10.
Hit Enter. The screen will read:
11.
Hit enter again. The screen will read:
12.
Activate the Tele Out function until the boom starts
to move, then leave off immediately. The display will
read CRK PT = and show the numeric crack point
value.
13.
Hit enter. The number displayed will be the value
that the crack point is set to. The screen will show:
14.
Hit Enter. The screen will read:
Advertising