JLG 1100SB Service Manual User Manual
Page 80
Advertising
SECTION 3 - CHASSIS & TURNTABLE
3-38
– JLG Lift –
3121265
36.
By using pliers assemble the circlip (36) into its seat
in the brake shaft (35).
37.
Turn the gearbox upside down and assemble the
brake shaft (35) inside the flanged hub (31).
38.
Assemble the brake discs package according to the
following order: first, insert one sintered bronze disc
with external teeth (33).
39.
Then insert an internally toothed steel disc (32).
Repeat the operation until all 5 sintered bronze discs
and 4 steel discs have been assembled.
40.
Fit the internal O-ring seal (41) and the backup ring
(40) into their seats in the spacer (39).
41.
Fit the external O-ring seal (38) and the backup ring
(37) into their seats in the spacer (39).
Advertising