JLG 1100SB Service Manual - Manual (Page 74)

SECTION 3 - CHASSIS & TURNTABLE
3-32 – JLG Lift – 3121265
4. Using the same tool (6689960300), assemble the
2nd half seal (29) on the flanged hub (31).
5. Carefully clean the metallic faces of the lifetime seal
(29) and lube the surfaces with oil.
6. Insert the seal ring (30) in its seat in the flanged hub
(31).
7. Apply grease TECNOLUBE SEAL GS730 on the seal
ring (30).
AVOID GETTING GREASE IN CONTACT WITH THE LIFETIME SEAL
(29)
8. By using a hoist, place the gearbox housing (23) on
the flanged hub (31).
9. By using a press and a metallic stopper, push the
gearbox housing (23) against the shoulder on the