JLG 1100SB Service Manual - Manual (Page 330)

SECTION 6 - JLG CONTROL SYSTEM
6-46 – JLG Lift – 3121265
10. Hit Enter. The screen will read:
11. Hit Enter again. The screen will read:
12. Activate the steer control until the tire and wheel are
straight in relationship with the chassis, then leave
off the control. The display will read FRT LEFT =
and show the numeric calibration value for that
wheel.
13. Hit Enter. The screen will read:
14. Repeat steps 10 thru 12 for left rear steer.
15. Left Rear Steer Calibration will be followed by Right
Forward Steer Calibration which will be followed by
Right Rear Steer Calibration.
16. After completing all the Steer Calibrations, hit ESC
twice to go back to CALIBRATIONS.