Lenze DDS v2.3 - Manual (Page 100)

Drive PLC Developer Studio
Working with projects and objects
6-22
l
DDS EN 2.3
1. Use the combination box User group to select the group to assign a password to.
2. Use the text field Password to enter the password. Every letter is represented by an asterisk
(*).
3. Repeat the entry in text field Confirm password.
4. Click OK to accept the input.
If the message “Password and its acknowledgement do not match.” appears, one of the two inputs
contains a typing error.
•
Retype both entries to ensure that the dialog box closes without any error messages.
If necessary, assign a password for the next group only then by requesting the command again.
Tip!
Use the command Object
➞ ➞ ➞ ➞Access rights to assign rights for individual or all objects.
6.1.3.2 Exception handling
Icon: - Menu: ProjectWException handling Keyboard: -
Use this command to open the dialog box Exception handling where the watchdog time for the
cyclical task and the general response of the selected automation system during a task overflow can
be defined.
( ^ 8-31)
The layout of the dialog box Exception handling depends on the settings of the automation system.
( ^ 8-38)
Servo PLC
Automation system with drive function
Note!
The configuration of the digital outputs
– gets lost with the extension modules.
– remains unchanged with the Servo PLC.
Show/Hide Bookmarks