Lenze DDS v2.3 - Manual (Page 183)

Drive PLC Developer Studio
Editors
7-61
l
DDS EN 2.3
The following example shows a step whose processing is to take a minimum of two and a maximum
of ten seconds.
7.8.3.7 Time limit overview
Icon: - Menu: ExtrasWTime limit overview Keyboard: -
Use this command to open the dialog box Time limit overview to edit the time settings for your SFC
steps.
The dialog box Time limit overview displays all steps of your SFC organization unit.
If a time limit has been entered for a step, it will be shown to the right of the step (minimum limit first,
then maximum limit).
Edit time limits
Time limits can be edited:
1. Click the required step in the overview. The step name is displayed at the bottom of the
window.
2. Use input fields Minimal time / Maximal time to specify the required time limit (constant or
variable of type TIME), e. g. T#3s.
3. Click OK to close the dialog box and save the changes.
Show/Hide Bookmarks