4 network editors (general), 1 jump labels, 2 network comments – Lenze DDS v2.3 User Manual

Page 148: 3 inserting a new network, Jump labels, Network comments, Inserting a new network, Drive plc developer studio

Advertising
background image

Drive PLC Developer Studio

Editors

7-26

l

DDS EN 2.3

7.4

Network editors (general)

The DDS network editors can be used for programming in the graphically oriented languages FBD,
LD and CFC.

Both network editors allow jump labels, network commands and the commands Insert

Network

(after)/Insert

Network (before).

7.4.1

Jump labels

Each network has a jump label that may also be blank.

This label can be edited by clicking next to the network number in the first line of the network. It is
now possible to enter a label followed by a colon.

7.4.2

Network comments

Every network can be commented in several lines. To distinguish them from program text,
comments are shown in grey.

7.4.2.1

Options for network comments

Icon:

-

Menu:

ExtrasWOptions

Keyboard:

-

Use this command to define the following options for network comments:

Maximum comment size

Use the field

Maximum comment size to define the maximum number of lines to be available for a

network comment (preset: 4).

Minimum comment size

Use the field

Minimum comment size to define the number of lines to be generally available for

comments (preset: 0).

If this field specifies 2, for example, every network will start with two blank comment lines
after the label line. The lower the value, the more networks can be displayed on screen.

If the minimum comment size is greater than 0, click the associated comment line to enter a
comment.

If the minimum comment size is 0, first select the network to be commented and then click
Insert

Comment to insert a comment line.

7.4.3

Inserting a new network

7.4.3.1

Network (after)/ Network (before)

Icon:

-

Menu:

InsertWNetwork (after)

InsertWNetwork (before)

Keyboard:

<Ctrl>+<T>
-

Use this command to insert a new network in front of or behind the current network in the FBD or
LD editor.

Change the current network (dotted rectangle and network number) by clicking the network
number.

Click keeping the <Umschalt> key depressed to select all networks between the current and
the clicked network.

Show/Hide Bookmarks

Advertising