Lenze DDS v2.3 - Manual (Page 87)

Drive PLC Developer Studio
Working with projects and objects
6-9
l
DDS EN 2.3
6.1.2.3 Clean all
Note!
A log-in without another project download is possible only if the file *.ri containing the project
information of the last download was explicitly stored outside the project directory before and can
be reloaded prior to log-in.
Execute the menu command Project WLoad download information.
Icon: - Menu: ProjectWClean all Keyboard: -
This command clears the information of the last download and the last compile. Once the command
has been executed, the system displays a dialog to advise that no log-in is possible without another
download. You can continue or cancel the process at this point.
6.1.2.4 Load download information
Icon: - Menu: ProjectWLoad download information... Keyboard: -
Use this command to directly reload the associated download information as long as the information
was not stored in the project directory. The standard dialog
File
➞ ➞ ➞ ➞Open allows the direct loading of stored information.
•
On each download, the download information is automatically put into a file
project name Targetidentifier.ri. Example: LD_FillingPlants00000000r.ri
and included in the project directory.
•
It will be reloaded automatically every time the project is opened and allows the control to
perform an ID check to establish whether
the project on the control matches the open project.
•
A check is made to find those organization units whose generated code has changed. Only
these organization units are reloaded during downloads for systems supporting online change.
If the *.ri file was deleted from the project directory via the menu command Project
➞ ➞ ➞ ➞Clean all, the
download information can be explicitly loaded from another directory with Project
➞ ➞ ➞ ➞Load
download information....
6.1.2.5 Translate into other languages
Icon: - Menu: ProjectWTranslate into other languages Keyboard: -
This menu item translates the current project file into a different national language by reading a
translation file generated from the project. The translation file will then be updated with translated
texts in the desired national language with the help of a text editor.
For this purpose, the menu offers two subitems.
•
Project ➞ ➞ ➞ ➞Translate into other languages➞ ➞ ➞ ➞Create translation file
•
Project
➞ ➞ ➞ ➞Translate into other languages➞ ➞ ➞ ➞Translate project into another language
Show/Hide Bookmarks