Lenze DDS v2.3 - Manual (Page 36)

Drive PLC Developer Studio
Program example
3-14
l
DDS EN 2.3
3.3 Simulation
Now test the program.
1. Select Project ➞ ➞ ➞ ➞Compile all to compile the program.
2. Select Online
➞ ➞ ➞ ➞Simulation to test the program in simulation mode.
3. Select Online ➞ ➞ ➞ ➞Log in to log into the control.
4. Select Online ➞ ➞ ➞ ➞Start to execute the program.
Since the simulation mode is activated, the program will be executed in the DDS instead of the
control.
Monitoring
You can follow the sequence of the individual steps of your main program PLC_PRG in the editor
window.
•
The active step is displayed blue.
•
Double-click the plus sign in the declaration editor to open the variable declaration and
monitor the current individual variable values.
Show/Hide Bookmarks