Lenze DDS v2.3 - Manual (Page 250)

Drive PLC Developer Studio
Visualization
9-16
l
DDS EN 2.3
•
The display then is as follows in online mode. The previously made inputs return the
representation below.
To test the effect of the Formatted number display, enter other formats as well with %.
•
” % s” will be substituted in online mode with the value of the variable entered in the input field
Text display.
ConfigureWInput available for: all
Use Extras
➞ ➞ ➞ ➞Configure, category Input to define whether the online mode should allow mouse and
keyboard inputs or not.
Toggle variable
If check box Toggle variable is activated, every mouse click will toggle the value of the Boolean
variable entered in the input field behind.
•
Every mouse click on the visualization element will toggle the value of the Boolean variable
from TRUE to FALSE or from FALSE to TRUE.
Tip variable
If check box Tip variable is activated, the value of the Boolean variable specified in the input field
behind will be changed by pressing the left mouse key and keeping it depressed.
•
The value of the Boolean variable will change from TRUE to FALSE or fromFALSE to
TRUE
when positioning the mouse pointer over the visualization element, then pressing the left
mouse key and keeping it depressed.
•
The value of the Boolean variable will return to its original status on releasing the left mouse
key.
•
If check box Tip FALSE is active, the value - on clicking OK - will change from TRUE to
FALSE.
Caution!
This function cannot always be guaranteed to be reliable. Do not use Tip variable for safety-relevant
drive control functions (such as positioning, for example).
Show/Hide Bookmarks