Lenze DDS v2.3 - Manual (Page 244)

Drive PLC Developer Studio
Visualization
9-10
l
DDS EN 2.3
9.3 Configuring visualization elements
9.3.1 Commands in the “Extras” menu
9.3.1.1 Settings
Icon: - Menu: Extras WSettings Keyboard: -
Use this command to open the dialog box Visualization settings for the following settings:
Category View
•
Text field Zoom permits a zoom factor from 10 to 500 % .
•
If check box Element numbers is activated, the element number will be displayed for every
element in offline mode.
Category Frame
•
If check box Auto scrolling is activated, the visible area of the visualization window will be
moved automatically when drawing or moving a visualization element when the window
” frame” is reached.
•
If check box Automatic adaptation online is activated, the visualization is adapted to the
window size (all elements visible) in online mode.
•
If check box Include background bitmap is activated, a ticked check box Automatic
adaptation online means that the size of the bitmap is also considered when adapting the
visualization to the window; otherwise only the elements will be considered.
Category Grid
•
If check box Visible is activated, the pixels will be displayed in offline mode.
•
If check box Active is activated, elements can only be positioned onto pixels during drawing
and moving processes.
•
Text field Size defines the spacing between pixels.
Tip!
The spacing between visible pixels is at least 10 pixels, even if the text field Size specifies less.
At a lower-than-10 spacing, the pixels will still appear at a 10-pixel spacing.
Category Language
•
If check box Language file is active, a special language file *.vis can be generated.
•
Use the button ... to open a dialog to save the language file.
•
The combination box Language allows language selection.
•
The button Save stores the language file at the selected location.
•
Use the button OK to save the dialog box settings.
Show/Hide Bookmarks