Drive plc developer studio, Working with projects and objects, 18 controller enable – Lenze DDS v2.3 User Manual
Page 119: Warning, 19 controller inhibit
![background image](/manuals/565964/119/background.png)
Drive PLC Developer Studio
Working with projects and objects
6-41
l
DDS EN 2.3
6.3.1.18
Controller enable
Icon:
-
Menu:
OnlineWController enable
Keyboard:
-
Use this command to enable the controller.
The menu item will be deactivated for automation systems without controller inhibit.
•
In GDC, this function corresponds to the key Start.
Warning!
Do not use the commands Controller enable/Controller inhibit for an emergency stop via the PC
as these commands reach the controller with a delay.
In the DDS, these commands are added to the end of a message queue so that they will reach the
controller with a delay of several seconds in a worst-case scenario.
6.3.1.19
Controller inhibit
Icon:
-
Menu:
OnlineWController inhibit
Keyboard:
-
Use this command to inhibit the controller.
The menu item will be deactivated for automation systems without controller inhibit.
•
In GDC, this function corresponds to the key ”Stop”.
Show/Hide Bookmarks