Lenze DDS v2.3 - Manual (Page 167)

Drive PLC Developer Studio
Editors
7-45
l
DDS EN 2.3
7.7.5.4 Jump
Icon: Menu: InsertWJump Keyboard: <Ctrl>+<J>
Use this command to insert a jump in the CFC editor.
The inserted jump is pre-assigned with the text ” ???” .
•
Click this text to change it into the required jump label to be jumped to.
•
Insert a jump label with Insert
WLabel.
7.7.5.5 Label
Icon: Menu: InsertWLabel Keyboard: <Ctrl>+<L>
Use this command to insert a jump label in the CFC editor.
•
Click this text to change it into the required jump label.
•
Insert a jump to this label using Insert
WJump.
7.7.5.6 Return
Icon: Menu: InsertWReturn Keyboard: <Ctrl>+<R>
Use this command to insert a RETURN instruction in the CFC editor.
7.7.5.7 Comment
Icon: Menu: InsertWComment Keyboard: <Ctrl>+<K>
Use this command to insert a comment in the CFC editor.
•
Use <Ctrl>+<Enter> to add a line break in a comment.
7.7.5.8 Box input
Icon: - Menu: InsertWBox input Keyboard: <Ctrl>+<U>
Use this command to insert a box input in the CFC editor.
With many operators the number of inputs may vary (e. g. the box ADD may have two or more inputs).
•
In order to extend such an operator by one input, the operator itself must be selected first.
7.7.5.9 In pin / out pin
Icon: Menu: InsertWIn pin Keyboard: -
Icon: Menu: InsertWOut pin Keyboard: -
These commands are available only while a macro is open and
•
support the insertion of in or out pins as the inputs and outputs of a macro.
•
receive no position index.
Show/Hide Bookmarks