Lenze DDS v2.3 - Manual (Page 215)

Drive PLC Developer Studio
Resources
8-25
l
DDS EN 2.3
8.6.1.4 Replace element
Icon: - Menu: ExtrasWReplace element Keyboard: -
A correctly defined configuration file allows an element selected in the configuration tree to be
replaced with another. This also includes the switching of channels so that they can be used with
the configuration as input or output.
8.6.1.5 Calculate addresses
Icon: - Menu: ExtrasWCalculate addresses Keyboard: -
Note!
Not all automation systems support this function.
Execution of this menu item requires the check box Calculate addresses to be selected in the
general PLC configuration settings.
Calculate addresses applies from the selected module and includes all of the elements below.
8.6.1.6 Default configuration
Icon: - Menu: ExtrasWDefault configuration Keyboard: -
Use this command to delete the set configuration and to return to the original configuration.
8.6.1.7 Convert old PLC configurations
Icon: - Menu: ExtrasWConvert Keyboard: -
Use this command to convert any project opened that includes a PLC configuration generated with
an older DDS version into the format of the current PLC configuration.
Convert the older project only if you require, and want to use, the functions of DDS 2.x.
Note!
The old configuration cannot be restored.
Show/Hide Bookmarks