Lenze DDS v2.3 - Manual (Page 81)

Drive PLC Developer Studio
Working with projects and objects
6-3
l
DDS EN 2.3
Saving project as library
If the project is to be saved as library for use in other projects, select the file type
•
”Internal library (*.lib)” if you programmed your POUs in the DDS.
Then click OK.
•
The current project will be saved to the selected file. If the new file name already exists, the
user will be prompted as to whether this file is to be overwritten or not.
•
If the project is saved as library, the entire project will be compiled. Should an error occur, the
user will be informed that a correct project is required to generate a library. In such case, the
project will not be saved as library.
6.1.1.7 Save/mail archive
Icon: - Menu: FileWSave/mail archive Keyboard: -
DDS has an archive function using which all files of a project (libraries, bitmaps, etc.) can be saved
in an archive file.
Note!
To archive a project without the necessity of a compile and download during a later log-in, carry out
a download before archiving the project and activate the check box
Compile Information in the dialog
box Save Archive.
Use this command to generate a ZIP archive file containing all significant DDS project files. The ZIP
file can be saved in the file system or e-mailed.
After the ZIP file has been decompressed, you can log in a controller without prior download.
Note!
Proceed as follows to use the ZIP archive in this way:
1. The corresponding files (libraries, bitmaps, etc.) of a project must be created relative to the
project.
2. Open the following dialog using the menu command Project
WOptions category
Directories
and enter just ”.\ ” in the field Libraries. The input fields Compile files and Configuration files
remain empty.
Note!
Paths which have been assigned a disk drive (SUBST[Disk drive1: Disk drive2:]Path) are not
supported.
Do not use the SUBST Windows function.
Show/Hide Bookmarks