Lenze DDS v2.3 - Manual (Page 99)

Drive PLC Developer Studio
Working with projects and objects
6-21
l
DDS EN 2.3
Multiple save on output
This function looks for memory areas that are accessed at several locations within a project. Output
is then as follows:
% QB24 is described at the following locations:
PLC_PRG (3): %QB24
PLC_PRG.POU1 (8): %QB24
6.1.3 User groups
The DDS allows up to eight groups to be set up with different access rights to organization units, data
types, visualizations and resources.
Access rights can be defined for individual or all objects.
•
All projects are opened by a member of a specific user group.
•
The member must authenticate himself with a password.
The user groups are numbered from 0 to 7, with group 0 having administrator rights, i. e., only group
0 members must define passwords and access rights for all groups or objects.
•
New projects are initially not password-protected.
•
As long as no password has been set up for user group 0, everybody who opens the project is
a member of user group 0.
•
If a password has been set up within a project for user group 0, all groups are prompted for a
password when opening the project.
1. Use the combination box User group to select the group you belong to.
2. Use the text field Password to enter the password.
3. Click OK to accept the input.
If the password does not match the saved password, the message “The password is not correct.”
will be displayed.
•
Only correct password entry will open the project.
Caution!
A project may be opened via a user group that was not assigned a password.
•
Use the menu item Project
WUser group passwords to assign passwords.
•
Use the menu item Project WObjectsWAccess rights to assign rights for individual or all
objects.
6.1.3.1 User group passwords
Icon: - Menu: ProjectWUser group passwords Keyboard: -
Use this command to open the dialog box User group passwords .
Note!
This command can only be executed by members of group 0 (administrators).
Dialog box ” User group passwords ”
Show/Hide Bookmarks