Lenze DDS v2.3 - Manual (Page 69)

Drive PLC Developer Studio
Working area
5-9
l
DDS EN 2.3
Bit values
Use the group box Bit values to choose between three different representation formats for binary
data (types BYTE, WORD, DWORD) for monitoring:
•
Decimal
•
Hexadecimal
•
Binary
A dot identifies the active selection.
Monitoring of complex types
Show POU symbols
If chec box Show POU symbols is selected, Lenze organization unit signal propagation charts are
shown as bitmaps.
Options WDesktop
If an option is active, a tick appears in front of the option. ( ü)
Tool bar
If the option Tool bar is activated, the tool bar will be displayed below the menu bar for faster access
to menu commands.
Status bar
If the option Status bar is activated, the status bar will be displayed at the bottom edge of the DDS
main window.
Online in security mode
If the option Online in security mode is activated, online mode displays a dialog box for the
commands Start, Stop, Reset, Breakpoint on, Single cycle and Write values offering an
additional security prompt as to whether the command is indeed to be executed. This option is
saved together with the project.
Language
DDS dialog and menu languages are German and English.
Note!
Languages can be selected under Windows NT and Windows 2000 only.
Show/Hide Bookmarks