Lenze DDS v2.3 - Manual (Page 179)

Drive PLC Developer Studio
Editors
7-57
l
DDS EN 2.3
7.8.2 Commands in the “Insert” menu
7.8.2.1 Step transition (before)
Icon: Menu: InsertWStep transition (before) Keyboard: <Ctrl>+<T>
Use this command to insert a step followed by a transition before the block selected in the SFC
editor.
Tip!
A step followed by a transition can be deleted by selecting step and transition and pressing the
<Del> key.
(Keep the <Ctrl> key depressed to select several objects.)
7.8.2.2 Step transition (after)
Icon: Menu: InsertWStep transition (after) Keyboard: <Ctrl>+<E>
Use this command to insert a step followed by a transition after the first transition in the block
selected in the SFC editor.
Tip!
A step followed by a transition can be deleted by selecting step and transition and pressing the
<Del> key.
(Keep the <Ctrl> key depressed to select several objects.)
7.8.2.3 Alternative branch (right)
Icon: Menu: InsertWAlternative branch (right) Keyboard: <Ctrl>+<A>
Use this command to insert an alternative branch as right-oriented branch to the block selected in
the SFC editor.
•
For this purpose, the selected block must start and end with a transition. The new branch
then consists of a transition.
7.8.2.4 Alternative branch (left)
Icon: Menu: InsertWAlternative branch (left) Keyboard: -
Use this command to insert an alternative branch as left-oriented branch to the block selected in
the SFC editor.
•
For this purpose, the selected block must start and end with a transition. The new branch
then consists of a transition.
Show/Hide Bookmarks