Drive PLC Developer Studio
Index
16-5
l
DDS EN 2.3
Project check, 6-20
Project comparison, 6-16
Project generation, 2-1
Project information, 6-18
Project structure, 2-1
Project translate, 6-12
Properties, 6-28, 7-47, 8-24, 8-34
Pulse encoder, 14-16
R
Read receipt, 8-37
Rectangle, 9-2
Redo, 7-1
Remote gateway, 6-38
Rename object, 6-27
Rename watch list, 8-36
Replace, 7-5
Replace element, 8-25
Reset, 6-33
Resources, 2-8
Retentive constants, 7-11
Retentive global constants, 8-2
Retentive global variables, 8-2
Retentive variables, 7-11
Return, 7-31, 7-38, 7-45
Rising edge detector, 14-12
Rotating bits to the left, 12-6
Rotating bits to the right, 12-7
Rounded rectangle, 9-2
S
Save, 6-2
Save as, 6-2
Save log , 6-43
Save watch list, 8-36
Saving an event, 8-30
Saving project as library, 6-3
Saving the project log , 6-43
Saving the project under a new name, 6-2
Scaling, 9-13
Segment , 14-8
Select all, 9-8
Select background bitmap, 9-11
Select document template, 8-3
Select PLC , 3-2
Selecting objects, 6-24
Selection mode, 9-2
Send back by one, 7-52
Sequential Function Chart (SFC), 4-11
Set/Reset, 7-33, 7-40, 7-46
Setting a breakpoint, 6-35
Settings, 9-10
SFCCurrentStep, 7-64
SFCEnableLimit, 7-63
SFCError, 7-64
SFCErrorPOU, 7-64
SFCErrorStep, 7-64
SFCInit, 7-63
SFCPause, 7-64
SFCQuitError, 7-64
SFCTrans, 7-64
Shifting bits to the left, 12-6
Shifting bits to the right, 12-6
Signal colour, 9-18
Simulation, 2-1, 2-10, 6-37
Sine, 14-6
Single cycle, 2-9, 6-36
Single step, 2-9
Single step in, 6-35
Single step over, 6-35
Single step processing, 7-65
Single-element variables, 7-19
Software semaphore, 14-11
Square root, 14-5
Standard font, 9-12
Standard.lib, 8-43
Start, 6-33
Start string, 14-7
Starting the DDS, 3-2
Statistics, 6-18
Status bar, 5-9
Step attributes, 7-60
Step flag, 4-13
Step into macro, 7-54
Step transition (after), 7-57
Show/Hide Bookmarks