Lenze DDS v2.3 - Manual (Page 67)

Drive PLC Developer Studio
Working area
5-7
l
DDS EN 2.3
Ask for project information
If check box Ask for project information is activated, the project information will be called
automatically when a new project is saved or an existing project is stored under a new name.
Project information can be viewed and edited using the menu command
Project
➞ ➞ ➞ ➞Project information.
Autoload
If the option Autoload is activated, the project opened last will be loaded automatically next time
the DDS is started.
A project can also be loaded on DDS start by specifying the project name in the command line.
Save before compile
The project is saved prior to each compile.
OptionsWUser information
Every entry can be changed and will be saved together with the project.
Options WEditor
If an option is active, a tick appears in front of the option. ( ü)
Show/Hide Bookmarks