Document Outline

• Title
• Table of contents
• Comments
• 1 Brief description
  • 1.1 General
  • 1.2 Basic operation
  • 1.3 Main features
• 2 Technical data
  • 2.1 Key to types, rating plate
  • 2.2 Series of types
    • 2.2.1 Technical data at rated current
    • 2.2.2 Technical data at rated current 1.5
    • 2.2.3 Power loss and cooling air volume
  • 2.3 System data
    • 2.3.1 Standards, operating conditions and certificates
      • 2.3.1.1 Standards applicable
      • 2.3.1.2 Certificate
      • 2.3.1.3 CE Certificate
    • 2.3.2 CE mark
  • 2.4 Supply components
    • 2.4.1 Components for 3AC supply
      • 2.4.1.1 Fuses for 3AC mains connection
      • 2.4.1.2 Mains choke (3-phase chokes)
      • 2.4.1.3 Line fuses for operation class gL and cable cross-sections
      • 2.4.1.4 Fuse circuit breakers
      • 2.4.1.5 Mains contactor
  • 2.5 Options
  • 2.5.1 Control unit (BDE)
    • 2.5.2 Brake chopper and braking resistors
      • 2.5.2.1 Brake chopper
      • 2.5.2.2 Braking resistors
    • 2.5.3 RFI filters
    • 2.5.4 Motor filters and output chokes
      • 2.5.4.1 Motor filters
      • 2.5.4.2 Motor choke
    • 2.5.6 Option boards
      • 2.5.6.1 Encoder interface
      • 2.5.6.2 Operation on a mains supply with no earth
  • 2.6 Summary circuit diagrams
    • 2.6.1 Summary circuit diagram, 8230 frequency inverter
  • 2.7 Connection, terminal wiring
    • 2.7.1 Power stack
      • 2.7.1.1 3AC supply
    • 2.7.2 Electronic section, A10 control board
      • 2.7.2.1 Terminal strip wiring: X15 and signal functions
      • 2.7.2.2 Description of terminal strip inputs/outputs
  • 2.8 Dimensions, installation drawing, weights
    • 2.8.1 8230 frequency inverter build-in units
    • 2.8.2 Mains chokes for 8230 frequency inverter
    • 2.8.3 Installation drawing for control unit
    • 2.8.4 Dimensions and installation dimensions, Base for semiconductor fuses of operating class gR with 110mm length
    • 2.8.7 Dimensions and installation dimensions, Braking resistor
    • 2.8.8 Dimensions and weights motor filters
    • 2.8.9 Motor choke
    • 2.8.10 Dimensions and weights
• 3 Transport, Installation and Connection
  • 3.1 Safety instructions
  • 3.2 Storage
  • 3.3 Transport
  • 3.4 Installation
  • 3.5 Connection and wiring
    • 3.5.1 Potential separation
  • 3.6 Installation and connection instructions for EMC
  • 3.7 Specific measures for ensuring electromagnetic compatibility (EMC)
• 4 Operation and Software
  • 4.1 Unit operation
    • 4.1.1 Software structure
    • 4.1.2 Control philosophy
  • 4.2 Parameter adjustment
  • 4.3 Menu
  • 4.4 Desription of parameters and displays
    • 4.4.1 Display
    • 4.4.2 Application parameter
    • 4.4.3 Configuration parameters
    • 4.4.4 Parameters for analog I/O
    • 4.4.5 Parameters for digital I/O's
    • 4.4.6 Ratings
    • 4.4.7 Control parameters
    • 4.4.8 Diagnosis
    • 4.4.9 Password
    • 4.4.10 Language
• 5 Commissioning
  • 5.1 Safety instructions for commissioning
  • 5.2 Commissioning sequence diagram, 8230 frequency inverter build-in unit
  • 5.3 General
  • 5.4 Mains and motor connections
  • 5.5 Commissioning Report
  • 5.6 First commissioning with the 8230 frequency inverter BDE control unit
    • 5.6.1 Language Select
    • 5.6.2 Ratings
    • 5.6.3 Control structure
    • 5.6.4 Speed adjustment/speed limit
    • 5.6.5 Field weakening
    • 5.6.6 Multiple motor operation / Group supply
    • 5.6.7 Motor potentiometer function
  • 5.7 Terminal strip wiring
  • 5.8 Configuring the drive
  • 5.9 Demand selection
  • 5.10 Control structure
    • 5.10.1 Frequency control
    • 5.10.2 Control without encoder
    • 5.10.3 Control with encoder
• 6 Help in the event of errors
  • 6.1 First value log for error messages
  • 6.2 Switching sequences on errors
  • 6.3 Event log
  • 6.4 Events
  • 6.5 Error log
  • 6.6 Errors
• 7 Maintenance
  • 7.1 Battery for RAM and clock
    • 7.1.1 Battery change
    • 7.1.2 Technical data of battery
  • 7.2 Fans
  • 7.3 Power connection
  • 7.4 Reforming the link capacitors
• Declaration of Conformity AAS-KE 001/9.95