Rockwell Automation 1756-DHRIO_DHRIOXT ControlLogix Data Highway Plus-Remote I/O Communication Interface Module - Manual (Page 114)

114 Rockwell Automation Publication 1756-UM514C-EN-P - June 2014
Chapter 10 Using the Studio 5000 Environment in Remote I /O and Block Transfer Applications
Add the Module
After you start the Studio 5000 environment and create a project, you must create
a 1756-DHRIO or 1756-DHRIOXT module.
1. Right-click I/O configuration.
2. Click New Module.
3. Select the module.
4. Click OK.