Configure message instructions – Rockwell Automation 1756-DHRIO_DHRIOXT ControlLogix Data Highway Plus-Remote I/O Communication Interface Module User Manual
Page 72
Advertising
![background image](/manuals/579701/72/background.png)
72
Rockwell Automation Publication 1756-UM514C-EN-P - June 2014
Chapter 5
Messaging Between PLC-5 and SLC 5/04 Controllers
Configure Message Instructions
Use RSLogix 500 software to configure the SLC-500 controller message
instructions, as shown in the following figure.
IMPORTANT
RSLogix 500 software displays Nodes and link IDs in decimal. Also, in this
application, a remote bridge address is not required.
Advertising