Rockwell Automation 1756-DHRIO_DHRIOXT ControlLogix Data Highway Plus-Remote I/O Communication Interface Module - Manual (Page 53)

Rockwell Automation Publication 1756-UM514C-EN-P - June 2014 53
Using Programming Software in DH+ Applications Chapter 4
4. Add a message instruction (MSG) to the new rung.
5. Change the MSG instruction Control.
6. Configure the MSG instruction on the Setup dialog box.
Click here to add
a MSG.
Type the new Control
value here. This
example uses a Control
of MG10:0.
Double-click Setup
Screen to access the
message instruction
dialog box.