Rockwell Automation 1756-DHRIO_DHRIOXT ControlLogix Data Highway Plus-Remote I/O Communication Interface Module User Manual
Page 121
Advertising
![background image](/manuals/579701/121/background.png)
Rockwell Automation Publication 1756-UM514C-EN-P - June 2014
121
Using the Studio 5000 Environment in Remote I /O and Block Transfer Applications
Chapter 10
2.
Configure the 1756-DHRIO or 1756-DHRIOXT module, including
setting the channels for Remote I/O.
3.
Add a remote I/O adapter to the project.
4.
Configure the remote I/O adapter.
5.
Add remote I/O modules to the project.
6.
Configure remote I/O modules.
7.
Configure the Block Transfer (Read or Write) message instruction in the
project’s ladder logic.
8.
Download the project to the controller.
9.
Begin application operation (that is go online).
10.
If necessary, change the configuration for all modules and adapters in the
project.
Advertising