Configure the flex adapter, Configure the block transfer module – Rockwell Automation 1756-DHRIO_DHRIOXT ControlLogix Data Highway Plus-Remote I/O Communication Interface Module User Manual
Page 148
Advertising
![background image](/manuals/579701/148/background.png)
148
Rockwell Automation Publication 1756-UM514C-EN-P - June 2014
Chapter 12
Block Transfers with the 1756-DHRIO or 1756-DHRIOXT Module
Configure the FLEX Adapter
Use the Studio 5000 environment to configure the FLEX adapter. The following
figure shows some sample configuration dialog boxes for the FLEX adapter in
this example.
Configure the Block Transfer Module
Use the Studio 5000 environment to configure the Block Transfer module. The
following figure shows some sample configuration dialog boxes for the Block
Transfer module in this example.
Advertising