Configure message instructions – Rockwell Automation 1756-DHRIO_DHRIOXT ControlLogix Data Highway Plus-Remote I/O Communication Interface Module User Manual
Page 87
Advertising
Rockwell Automation Publication 1756-UM514C-EN-P - June 2014
87
Messaging Between PLC-5 or SLC 5/04 Controllers and ControlLogix Controllers
Chapter 6
Configure Message Instructions
Use RSLogix 500 software to configure the SLC-500 controller message
instructions. The following figure shows a message instruction necessary for this
example.
IMPORTANT
RSLogix 500 software displays nodes and link IDs in decimal. Also, in this
application, a remote bridge address is not required.
Advertising