Rockwell Automation 2755 AtomScan Bar Code Reader - Manual (Page 119)

Application Examples E–3
Publication 2755-6.9
3. Save and exit the configuration.
4. Move internal selector (jumper) to the data entry position on the
system board (B-5, B-6).
5. See Chapter 13 of Enhanced Decoder User Manual (Publication
No. 2755-833) for additional information.
This application example describes how to configure and operate the
readers when using an RS-232 cable connected to the flexible
interface module (Catalog No. 2760-RB).
!
ATTENTION: Do not install the RS-232 cable with
power applied to either the interface box or flexible
interface module. Failure to follow this caution may
result in damage to the reader, interface box, or flexible
interface module.
Refer to the following publications for additional information.
•
Flexible Interface Module User Manual
(Publication No. 2760-ND001)
•
SFC1 or SFC2 Protocol Cartridge User Manuals
(Publication Nos. 2760-ND002 or 2760-822)
Flexible Interface Module