Rockwell Automation 2755 AtomScan Bar Code Reader - Manual (Page 19)

2–4 Hardware Features
Publication 2755-6.9
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in
accordance with this user manual, may cause harmful interference to
radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user
will be required to correct the interference at his or her own expense.
!
ATTENTION: Use of controls, adjustments, or
performance of procedures other than those specified
herein may result in hazardous laser light radiation
exposure.
!
ATTENTION: There are no user serviceable parts in
the readers. Opening the scan head could expose the
user to laser diode power of up to 5 mW.
!
ATTENTION: The laser beam can be harmful to
eyesight. Avoid direct eye contact with the laser beam
Never point the beam at other people, or in a direction
where people may be passing.
Be aware of the following laser caution symbol on the readers.
Safety Information