Rockwell Automation 2755 AtomScan Bar Code Reader User Manual
Page 34
Advertising
4–4
Installing Your Hardware
Publication 2755-6.9
3. Mount the plate to your mounting surface. You can mount the
plate to the top, bottom, or side of your mounting surface.
Use # 6 screws.
Make sure placement of the mounting plate will allow you to
connect the reader to the interface box (Catalog Nos.
2755-LS7-IB1 and 2755-LS7-IB2) or other network device. The
maximum distance from the interface box to the reader is 3 ft.
(0.91 m). Skip steps #4 and #5 if you are not using an interface
box.
Reader
Mounting Surface
4. Mount the interface box to your mounting surface. Use # 6
screws with maximum penetration of 0.25 in. (6.35 mm).
Mounting Surface
Interface Box
5. Place the power supply within 6 ft. (1.83 m) of the interface box.
Advertising